Qidi Max4 Second Camera for D3P Riser

Qidi Max4 Second Camera for D3P Riser

Ücretsiz STL Diğer
  • 23 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Thingiverse üzerinde görüntüle ↗

Açıklama

This print permits you to mount a second inexpensive wide angle camera into the D3P riser for the Qidi Max4.(See: https://cults3d.com/en/3d-model/tool/d3p-riser-for-qidi-max-4 )The mount is printed in two parts that are glued together after printing and installing the inserts.The base replaces one of the clips used to assemble the riser's frame.The camera case stand is affixed to the mount using M3 screws threaded into M3x6x5 heat inserts.The base is held in place against the weight of the camera, by looping the USB cable under the riser top and/or affixing the cable loops with a wire tie.

Bu model hakkında

Qidi Max4 Second Camera for D3P Riser, Thingiverse topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Thingiverse üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller