Speedlight Double Mount

無料 STL ガジェット

27 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

説明

This double holder for speedlights allows you to use two speedlights on one umbrella holder at the same time, thereby doubling the light intensity. ColdShoe Double Flash Holder1 and ColdShoe Double Flash Holder Spigot assembled together form a complete printed system, as shown in the picture. Depending on the print quality, you may need to sand down the opening for the spigot slightly and then insert the assembled spigot with superglue. If you have separately available metal spigots and 1/4-inch screws, you can use them together with ColdShoe Double Flash Holder2. Print everything with 100% infill and in 0.16 mm layers for maximum strength. I printed it with PLA and it holds up perfectly. Nevertheless: use at your own risk! Have fun and good luck with it ;) https://youtu.be/dCFX0nVFoUs

About this model

Speedlight Double Mount is a 無料 3D model in the ガジェット category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.