説明
Venomous Serpent Walking Stick Topper (Simple 22mm Hole | Detailed 22mm Hole | Simple Solid | Detailed Solid) A dramatic cobra cane handle featuring an aggressive open-mouthed serpent with extended fangs and curved S-shaped neck. Designed for cosplay canes, villain props, gothic walking sticks, or luxury fantasy builds. Available in both simplified and highly detailed versions. Perfect for: • Victorian villain cosplay • Gothic aristocrat characters • Dark fantasy builds • Vampire / occult aesthetics • Fantasy walking staff builds • Display prop canes Versions Included: • Simple – 22mm hole • Detailed – 22mm hole • Simple – Solid • Detailed – Solid Always measure your pole before printing. 📏 Measuring Instructions Measure your cane shaft diameter with calipers. Confirm it matches 22mm. If slightly loose, adjust scale 101–102%. If tight, scale down 98–99%. Test print lower collar section first if unsure. 🖨️ Printing Instructions Recommended Materials • PLA / PLA+ • PETG • PLA-HT • FPLA • Elastomer-based filament (for convention-safe builds) For wearable cosplay: PETG or PLA-HT recommended for durability. Layer Height 0.12–0.16 mm for detailed scales 0.2 mm acceptable for Simple version Infill 30–40% recommended for structural strength Higher infill for functional display cane Supports Required under: • Lower jaw • Fang overhangs • Inner mouth cavity Print upright for best surface finish. 🔥 Fit Adjustment Tip If the fit is slightly tight after printing: Use a hairdryer or heat…
About this model
🐍 Cobra Cane Handle is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
