🐍 Cobra Cane Handle

Açıklama

Venomous Serpent Walking Stick Topper (Simple 22mm Hole | Detailed 22mm Hole | Simple Solid | Detailed Solid) A dramatic cobra cane handle featuring an aggressive open-mouthed serpent with extended fangs and curved S-shaped neck. Designed for cosplay canes, villain props, gothic walking sticks, or luxury fantasy builds. Available in both simplified and highly detailed versions. Perfect for: • Victorian villain cosplay • Gothic aristocrat characters • Dark fantasy builds • Vampire / occult aesthetics • Fantasy walking staff builds • Display prop canes Versions Included: • Simple – 22mm hole • Detailed – 22mm hole • Simple – Solid • Detailed – Solid Always measure your pole before printing. 📏 Measuring Instructions Measure your cane shaft diameter with calipers. Confirm it matches 22mm. If slightly loose, adjust scale 101–102%. If tight, scale down 98–99%. Test print lower collar section first if unsure. 🖨️ Printing Instructions Recommended Materials • PLA / PLA+ • PETG • PLA-HT • FPLA • Elastomer-based filament (for convention-safe builds) For wearable cosplay: PETG or PLA-HT recommended for durability. Layer Height 0.12–0.16 mm for detailed scales 0.2 mm acceptable for Simple version Infill 30–40% recommended for structural strength Higher infill for functional display cane Supports Required under: • Lower jaw • Fang overhangs • Inner mouth cavity Print upright for best surface finish. 🔥 Fit Adjustment Tip If the fit is slightly tight after printing: Use a hairdryer or heat…