High Precision Cycloidal Drive
- 14 閲覧
このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Cults3D で見る ↗説明
This is version ten of my cycloidal drive it was developed as a prototype the drives for my larger 3D printed robot. The drive is highly accurate and requires minimal hardware it is designed to work with a nema 17 motor. It is designed to be printed with minimal support entirely out of PLA. The drive works with the top on or off and it around 87% efficient. More details of the model and the project as a whole are available on my tiktok @tldrengineering. BOM: - 3x 6mm M3 Screws - 9x 30mm M4 button head screws. - 9x M4 heat set inserts - 2x 61700-2RS 10x15x4mm Deep Groove Ball Bearing - 2x 6808-2RS 40X52X7mm Bearing - 2x MR148-ZZ 8x14x4mm Deep Groove Ball Bearing - 12x 8mm M4 aluminum spacers 8mm outer diameter (can be printed But will reduce Efficiency)
About this model
High Precision Cycloidal Drive is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
