35mm Riser for Flashforge AD5X Enclosure
- 18 閲覧
このモデルは Thingiverse で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Thingiverse で見る ↗説明
This is a riser designed to raise the top of the AD5X enclosure, so the Bowden tubes don't scrape the lid. The pieces are named A4-A through D4-A to indicate their positions, and they are embossed to help identify each piece. The riser sites between the #3 and #4 pieces of the Flashforge enclosure kit. They do not screw into the piece below, but you can screw the #4 piece into the riser. In my opinion, the screws are unnecessary as the pieces stay in place just fine thanks to gravity. I printed mine at 0.20 layer height in the same position as they sit on the machine with supports under the bottom groove for the acrylic. The pieces were designed in TinkerCad by merging the top of the #3 piece and the bottom of the #4 piece from the FF kit.
About this model
35mm Riser for Flashforge AD5X Enclosure is a 無料 3D model in the その他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
