説明
3D Printers Create a lot of Fumes and small plastic particles while printing that you don't want to breathe. The files included are small enough to be printed on a W150mm x L230mm x H150mm bed size. The filter box uses 4" hoses to connect to a fan to circulate the air in the room or printer enclosure. The fumes collector included is made to fit the opening of a FlashForge Creator Pro but can be used for any printer of that size. If you have an enclosure you can connect a 4" hose directly to the enclosure with the included hose attachment. The filters used and linked below are Activated carbon and Hepa H-13 rated filters proving filtration for both VOC's and dust particles down to about 3 microns. *The "Filter Box Side" file will need to be printed twice. The products used for this build are linked below- Filters: https://www.amazon.com/dp/B08T8WCWNX/?coliid=IU6R678UMJA4Q&colid=OQIIT9MF1D14&psc=1&ref=lvovligdp_it Fan(Any 4" duct fan works): https://www.amazon.com/dp/B01DXYMGOM/?coliid=I2WUL6KEAOREWH&colid=OQIIT9MF1D14&psc=1&ref=lvovligdp_it Hoses(Any 4" hose will work): https://www.amazon.com/dp/B074FV367K/?coliid=I39I3NA7E4CTYF&colid=OQIIT9MF1D14&psc=1&ref=lvovligdp_it Bolts: I'm not sure exactly what bolts are necessary but they need to be 6mm in diameter and about 1 - 1.5 inches long and the head cant me more than 10 mm wide.
About this model
3D Printer Fumes Filter is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
