3D Printer Fumes Filter

Описание

3D Printers Create a lot of Fumes and small plastic particles while printing that you don't want to breathe. The files included are small enough to be printed on a W150mm x L230mm x H150mm bed size. The filter box uses 4" hoses to connect to a fan to circulate the air in the room or printer enclosure. The fumes collector included is made to fit the opening of a FlashForge Creator Pro but can be used for any printer of that size. If you have an enclosure you can connect a 4" hose directly to the enclosure with the included hose attachment. The filters used and linked below are Activated carbon and Hepa H-13 rated filters proving filtration for both VOC's and dust particles down to about 3 microns. *The "Filter Box Side" file will need to be printed twice. The products used for this build are linked below- Filters: https://www.amazon.com/dp/B08T8WCWNX/?coliid=IU6R678UMJA4Q&colid=OQIIT9MF1D14&psc=1&ref=lvovligdp_it Fan(Any 4" duct fan works): https://www.amazon.com/dp/B01DXYMGOM/?coliid=I2WUL6KEAOREWH&colid=OQIIT9MF1D14&psc=1&ref=lvovligdp_it Hoses(Any 4" hose will work): https://www.amazon.com/dp/B074FV367K/?coliid=I39I3NA7E4CTYF&colid=OQIIT9MF1D14&psc=1&ref=lvovligdp_it Bolts: I'm not sure exactly what bolts are necessary but they need to be 6mm in diameter and about 1 - 1.5 inches long and the head cant me more than 10 mm wide.