説明
Support for motor Y. Stabilizes it, prevents the hot bed cable from locking against it. Can be adapted to other printers. As the height depends on each model and if there are attenuators or not, you must adapt the alter, it can be done from the laminator but you have to disable the proportionality as it will change the motor size parameters. It is recommended to use 3 perimeters for greater part strength. WARNING: In my case, my printer has some dampers. So for the standard model you have to reduce its height a little bit. If you print it like this it will be taller than it should be. be careful that the maximum height does not exceed that of the motor, it could jam if under the bed there is a heating plate to maintain the temperature of the bed.
About this model
Y Motor Support is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
