Funkade Mini Arcade Machine

Описание

This is a tiny working arcade machine I meticulously modeled and built. It’s approximately 2x2x5 inches and uses a Funkey S as the brain. Assembly is very simple and does not require any screws. It can really only go together and come apart ONE WAY. Total print time was around 8 and a half hours on my Ender 3 Max Neo, the cabinet was about 6.5 hours of that time. Assembly order: 1. Set cabinet upright 2. Slide button board in from front 3. Flip cabinet on face 4. Install buttons 5. With screen connected, carefully install motherboard 6. Carefully slide in the internal board support 7. Carefully install screen (top first) NOT an affiliate link, but here’s where you can get a Funkey S: https://www.funkey-project.com/ Enjoy! Thanks!