Funkade Mini Arcade Machine

Funkade Mini Arcade Machine

免费 STL 微缩模型
  • 25 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

This is a tiny working arcade machine I meticulously modeled and built. It’s approximately 2x2x5 inches and uses a Funkey S as the brain. Assembly is very simple and does not require any screws. It can really only go together and come apart ONE WAY. Total print time was around 8 and a half hours on my Ender 3 Max Neo, the cabinet was about 6.5 hours of that time. Assembly order: 1. Set cabinet upright 2. Slide button board in from front 3. Flip cabinet on face 4. Install buttons 5. With screen connected, carefully install motherboard 6. Carefully slide in the internal board support 7. Carefully install screen (top first) NOT an affiliate link, but here’s where you can get a Funkey S: https://www.funkey-project.com/ Enjoy! Thanks!

About this model

Funkade Mini Arcade Machine is a 免费 3D model in the 微缩模型 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型