GPSMount2

GPSMount2

Бесплатно STL Гаджеты
  • 23 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

So I wanted a low-profile mount for my Garmin LMT 50 to put in my Jeep and I came up with the laughing Pinocchio. He requires a piece of 2-sided gel tape under his nose and hooks onto the center of the dash above the stereo. The ball is 17mm and the GPS has a dash cam so it sits pretty much straight. I printed him at 95% and with supports. I printed on its side. May not work in very hot vehicles/climates unless you switch to ABS.

About this model

GPSMount2 is a бесплатно 3D model in the Гаджеты category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели