GPSMount2

GPSMount2

Ücretsiz STL Gadget ve Aksesuar
  • 26 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

So I wanted a low-profile mount for my Garmin LMT 50 to put in my Jeep and I came up with the laughing Pinocchio. He requires a piece of 2-sided gel tape under his nose and hooks onto the center of the dash above the stereo. The ball is 17mm and the GPS has a dash cam so it sits pretty much straight. I printed him at 95% and with supports. I printed on its side. May not work in very hot vehicles/climates unless you switch to ABS.

Bu model hakkında

GPSMount2, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller