Pasty / Dumpling maker

Pasty / Dumpling maker

Бесплатно STL Хобби и DIY
  • 30 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

Roll 2 party pasties, dumplings or anything else you desire, at a time. Hardware needed: 2 x 3mm screws, around 15mm long 1 x 4mm wide spring @ 50-55mm long for the sprocket 2 x springs (optional) for the ends of the rollers to keep them together so they don't spread apart under pressure Note: If you can make this better, I would be interested to see remixes.

About this model

Pasty / Dumpling maker is a бесплатно 3D model in the Хобби и DIY category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели