Pasty / Dumpling maker

Pasty / Dumpling maker

Ücretsiz STL Hobi ve DIY
  • 29 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Roll 2 party pasties, dumplings or anything else you desire, at a time. Hardware needed: 2 x 3mm screws, around 15mm long 1 x 4mm wide spring @ 50-55mm long for the sprocket 2 x springs (optional) for the ends of the rollers to keep them together so they don't spread apart under pressure Note: If you can make this better, I would be interested to see remixes.

Bu model hakkında

Pasty / Dumpling maker, Cults3D topluluğunda paylaşılan ücretsiz bir Hobi ve DIY 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller