Electric Tubes

Описание

This openscad module allows to produce electrical cabling system fastening elements, either to hold straight tubes in place, or to serve as rounded corner elements. See the openscad file for usage instructions. I've included a small set of STL files that can be readily used, but you can generate your own according to your cabling project's needs ABS is recommended. For straight supports, better strength will be achieved by printing on the side, in which case PLA is OK. Beware of Mains A/C, never expose unprotected wires, use at your own risk. Source maintained at https://github.com/greg-ware/elecparts