简介
This openscad module allows to produce electrical cabling system fastening elements, either to hold straight tubes in place, or to serve as rounded corner elements. See the openscad file for usage instructions. I've included a small set of STL files that can be readily used, but you can generate your own according to your cabling project's needs ABS is recommended. For straight supports, better strength will be achieved by printing on the side, in which case PLA is OK. Beware of Mains A/C, never expose unprotected wires, use at your own risk. Source maintained at https://github.com/greg-ware/elecparts
About this model
Electric Tubes is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
