Basic Enclosure Hinge

Basic Enclosure Hinge

Бесплатно STL Прочее
  • 25 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

Just a basic hinge I made for my 3d Printer enclosure. It has just enough lift for a thin piece of plexiglass for the front door of the enclosure. I used M3 nuts and bolts to hold on the plexiglass and pre-drilled a space for the M3 bolts to be secured into the frame of the enclosure and secured it with hot glue. A short piece of 1.75mm filament works as a pin. Just melt one end of the filament so it doesn't come out. Pieces required: 6x 10mm M3 bolts 3x M3 Nuts

About this model

Basic Enclosure Hinge is a бесплатно 3D model in the Прочее category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели