Basic Enclosure Hinge

Basic Enclosure Hinge

Ücretsiz STL Diğer
  • 24 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Just a basic hinge I made for my 3d Printer enclosure. It has just enough lift for a thin piece of plexiglass for the front door of the enclosure. I used M3 nuts and bolts to hold on the plexiglass and pre-drilled a space for the M3 bolts to be secured into the frame of the enclosure and secured it with hot glue. A short piece of 1.75mm filament works as a pin. Just melt one end of the filament so it doesn't come out. Pieces required: 6x 10mm M3 bolts 3x M3 Nuts

Bu model hakkında

Basic Enclosure Hinge, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller