ESP32 Camera Case

ESP32 Camera Case

Бесплатно STL Органайзеры и хранение
  • 25 просмотров

Эта модель размещена на Thingiverse. Файлы, изображения и лицензия принадлежат автору.

Открыть на Thingiverse ↗

Описание

Remix of Thing 3541406I added holes in the lid for a 2 pin DuPont connector which can power the camera with +5V and Ground, as well as a small mounting screw hole. I moved the SD card slot upwards from the front a little to give room for the camera module which sits in front of the SD card slot, and adjusted the flash position slightly. I also changed the print to not require any bridging while printing. The part of the case above the SD card slot is now part of the lid print. I also slightly reduced and moved the camera hole to better match the ESP32 camera pieces that I have. The overall fit is far superior now, and using a 2 pin DuPont connector for power works well for me.

About this model

ESP32 Camera Case is a бесплатно 3D model in the Органайзеры и хранение category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.

Похожие модели