Worm resin version

Описание

Movable worm No support required! Printed in assembly. For photopolymer printers, I raise the model from the table on a support (about 3 mm so that the photopolymer drips) There are 3 files to download: worm with a gap of 0.2 mm worm with a gap of 0.3 mm and two worms with different gap on the support I tested the model on different photopolymers: eco green from Anycubic - 0.2 mm gap model and gray from elegoo - 0.3 mm gap model 3D printer Anycubic photon mono CE After printing, separate and rinse the model - your worm is ready to play 8) if the segments do not move, use a larger gap not 0.2 but 0.3