简介
Movable worm No support required! Printed in assembly. For photopolymer printers, I raise the model from the table on a support (about 3 mm so that the photopolymer drips) There are 3 files to download: worm with a gap of 0.2 mm worm with a gap of 0.3 mm and two worms with different gap on the support I tested the model on different photopolymers: eco green from Anycubic - 0.2 mm gap model and gray from elegoo - 0.3 mm gap model 3D printer Anycubic photon mono CE After printing, separate and rinse the model - your worm is ready to play 8) if the segments do not move, use a larger gap not 0.2 but 0.3
About this model
Worm resin version is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
