PC Case (Mini-ITX)

PC Case (Mini-ITX)

Бесплатно STL Миниатюры
  • 20 просмотров

Эта модель размещена на Creality Cloud. Файлы, изображения и лицензия принадлежат автору.

Открыть на Creality Cloud ↗

Описание

PC Сase based on a Mini-ITX motherboard. SIZES- width – 215 mm; - depth – 215 mm; - height (with legs) – 95 mm. The hole for the button is 12.5 mm. The hole for the power connector is 8.5 mm. IMPORTANT!!! 1. The installation of the legs is mandatory, otherwise the ventilation of the housing will be disrupted. 2. The maximum height of the CPU cooler is 70 mm. 3. Check the dimensions of the components and the power of the DC-12V-24Pin-ATX Adapter several times and very carefully. PRINT1. 100% infill; 2. To print the Base, you need to enable support; 3. I recommend printing the legs from TPU.ASSEMBLING1. Attach the legs to double-sided adhesive tape. 2. The motherboard and the case cover are fixed using self–tapping screws with an external diameter of 3.5 mm (at least 4 mm, but I haven't tried it).

About this model

PC Case (Mini-ITX) is a бесплатно 3D model in the Миниатюры category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

Похожие модели