PC Case (Mini-ITX)

PC Case (Mini-ITX)

Ücretsiz STL Minyatürler
  • 24 görüntülenme

Bu model Creality Cloud üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Creality Cloud üzerinde görüntüle ↗

Açıklama

PC Сase based on a Mini-ITX motherboard. SIZES- width – 215 mm; - depth – 215 mm; - height (with legs) – 95 mm. The hole for the button is 12.5 mm. The hole for the power connector is 8.5 mm. IMPORTANT!!! 1. The installation of the legs is mandatory, otherwise the ventilation of the housing will be disrupted. 2. The maximum height of the CPU cooler is 70 mm. 3. Check the dimensions of the components and the power of the DC-12V-24Pin-ATX Adapter several times and very carefully. PRINT1. 100% infill; 2. To print the Base, you need to enable support; 3. I recommend printing the legs from TPU.ASSEMBLING1. Attach the legs to double-sided adhesive tape. 2. The motherboard and the case cover are fixed using self–tapping screws with an external diameter of 3.5 mm (at least 4 mm, but I haven't tried it).

Bu model hakkında

PC Case (Mini-ITX), Creality Cloud topluluğunda paylaşılan ücretsiz bir Minyatürler 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Creality Cloud üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller