Variable Keyboard Holder

Описание

Variable keyboard holder that allows you to change angle and height of the keyboard position relative to the table. The holder is designed to be mounted stationary on the bottom side of the table or to retractable wooden mount below the table.For the prints I used:* Creality K1 with generic ABS (default settings)* Raft support* 30% infillFor holder assembly you will need:* 4 pcs M6x50..60mm hex bolt screws * 8 pcs M6 washers * 4 pcs M6 wingnuts * 4 pcs 12x35/1.5mm (or similar) springs * 4 pcs wood screws and washers (for mounting holder to the table or retractable mount). For retractable wooden mount I used: * 2 pcs 30x30x500mm wood slats* 1 pc 25x100x300mm wood board* 1 pc 6.5x100x500mm plywood* 2 pcs 100x30x40 wood chunks* 4pcs 4.5x70mm wood screws* 2pcs 4.5x50mm wood screws