Variable Keyboard Holder

Variable Keyboard Holder

免费 STL 数码配件
  • 16 次浏览

该模型托管于 Creality Cloud。文件、图片及许可信息归原创作者所有。

在 Creality Cloud 查看 ↗

简介

Variable keyboard holder that allows you to change angle and height of the keyboard position relative to the table. The holder is designed to be mounted stationary on the bottom side of the table or to retractable wooden mount below the table.For the prints I used:* Creality K1 with generic ABS (default settings)* Raft support* 30% infillFor holder assembly you will need:* 4 pcs M6x50..60mm hex bolt screws * 8 pcs M6 washers * 4 pcs M6 wingnuts * 4 pcs 12x35/1.5mm (or similar) springs * 4 pcs wood screws and washers (for mounting holder to the table or retractable mount). For retractable wooden mount I used: * 2 pcs 30x30x500mm wood slats* 1 pc 25x100x300mm wood board* 1 pc 6.5x100x500mm plywood* 2 pcs 100x30x40 wood chunks* 4pcs 4.5x70mm wood screws* 2pcs 4.5x50mm wood screws

About this model

Variable Keyboard Holder is a 免费 3D model in the 数码配件 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

相似模型