M5StickC DCF77 HAT
- 13 просмотров
Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.
Открыть на Cults3D ↗Описание
M5StickC DCF77 HAT Basic hat implementation of a DCF77 receiver for M5StickC-Plus or compatible ESP32 devices. Device The current firmware was tested on 77.5KHZ single frequency device. It is the 4 pins version and it was bought here in Aliexpress (https://www.aliexpress.com/item/1005005254051736.html). Wiring | M5StickC pin | DCF77 pin | Description | |:----:|:----:|:-------------| | 0 | P | PON: Enable/Disable | | 26 | T | Interrupt pin or data | | 3.3v | VDD | Positive (3.3v) | | GND | GND | Ground / unlabeled pin | Usage Some tips for this working: x] check the right device. Some devices has different frequencies for each country. [x] Try to remove the device from any radio or wireless interference or noise. The radio is very susceptible to noise. [x] In indoors works, but is possible that in some builds doesn't. Try in outdoors first [x] the position of the device for me was important, in horizontal is possible that it works better Firmware Details in Github (https://github.com/hpsaturn/m5stickc-dcf77-hat#readme) Box Is a basic box - hat for these devices, for example M5StickC or M5StickC-Plus, also should be work in M5CoreInk device.
About this model
M5StickC DCF77 HAT is a бесплатно 3D model in the Прочее category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.