M5StickC DCF77 HAT
- 16 görüntülenme
Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.
Cults3D üzerinde görüntüle ↗Açıklama
M5StickC DCF77 HAT Basic hat implementation of a DCF77 receiver for M5StickC-Plus or compatible ESP32 devices. Device The current firmware was tested on 77.5KHZ single frequency device. It is the 4 pins version and it was bought here in Aliexpress (https://www.aliexpress.com/item/1005005254051736.html). Wiring | M5StickC pin | DCF77 pin | Description | |:----:|:----:|:-------------| | 0 | P | PON: Enable/Disable | | 26 | T | Interrupt pin or data | | 3.3v | VDD | Positive (3.3v) | | GND | GND | Ground / unlabeled pin | Usage Some tips for this working: x] check the right device. Some devices has different frequencies for each country. [x] Try to remove the device from any radio or wireless interference or noise. The radio is very susceptible to noise. [x] In indoors works, but is possible that in some builds doesn't. Try in outdoors first [x] the position of the device for me was important, in horizontal is possible that it works better Firmware Details in Github (https://github.com/hpsaturn/m5stickc-dcf77-hat#readme) Box Is a basic box - hat for these devices, for example M5StickC or M5StickC-Plus, also should be work in M5CoreInk device.
Bu model hakkında
M5StickC DCF77 HAT, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.
Dosya formatları
- STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.
Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.