Longer Ray5 Air Assist

Ücretsiz STL Diğer

13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

Not having the laser unit in hand yet I took measurements from another design by Vince Fero (i think) that i can no longer find and reference. I'm yet to print this so I'm not sure if/how it will work. The idea is to have a narrow air stream at about 45 deg and to leave a decent opening for the diode cooling flow from above. Please forgive the roughness of the 3d model but I'm a beginner with fusion. V2 has a few modifications with the nozzle pointing more towards the back and support added to the intake side. (removed) V3 has a larger tube and a bit more clearance for the intake and also from the burn surface. (removed) V5 With the laser unit in hand I was able to make some final adjustments. The cone is now more of a dome shape to increase the airflow from above (diode cooling) and the hose and nozzle have been tweaked to print better. I got best results printing 0.16 layer height.

Bu model hakkında

Longer Ray5 Air Assist, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.