BMG 45°Mount - 3030 Hypercube Evolution / HEVO

Ücretsiz STL Gadget ve Aksesuar

14 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

Mounts the Bondtech BMG style extruders to the side of the Hyeprcube Evolution with the Bowden coming out at a 45 degree angle. Helps with a short Bowden while keeping it out of the way of the rods. V1 is for 3030 extrusion. After printing I realized I didn't really needed the extra 2 screws (and all the support it needed to print) so I made V2 (not printed but I don't see a reason why it wouldn't work). Also V2 could be mounted on any extrusion size. I recommend printing the V2. V2 for M5 screws. V2.1 for M6 screws. To mount it, attach the mount to the frame first, then attach the motor and extruder together. The mount is symmetrical so you can use a right or a left handed extruder.

Bu model hakkında

BMG 45°Mount - 3030 Hypercube Evolution / HEVO, Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.