BMG 45°Mount - 3030 Hypercube Evolution / HEVO

BMG 45°Mount - 3030 Hypercube Evolution / HEVO

免费 STL 数码配件
  • 13 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

Mounts the Bondtech BMG style extruders to the side of the Hyeprcube Evolution with the Bowden coming out at a 45 degree angle. Helps with a short Bowden while keeping it out of the way of the rods. V1 is for 3030 extrusion. After printing I realized I didn't really needed the extra 2 screws (and all the support it needed to print) so I made V2 (not printed but I don't see a reason why it wouldn't work). Also V2 could be mounted on any extrusion size. I recommend printing the V2. V2 for M5 screws. V2.1 for M6 screws. To mount it, attach the mount to the frame first, then attach the motor and extruder together. The mount is symmetrical so you can use a right or a left handed extruder.

About this model

BMG 45°Mount - 3030 Hypercube Evolution / HEVO is a 免费 3D model in the 数码配件 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型