Experimental dismountable pump to be operational.

Experimental dismountable pump to be operational.

Ücretsiz STL Gadget ve Aksesuar
  • 13 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

16:37 19 Mard 202, I see that the output may be reversed there on picture, seems to me that the shaft motor facing is anti-rotational, it seemed to me to have paid attention, but? Nothing extraordinary, but I found my lost files of a removable and modifiable pump. 1st option water detection pre-chamber engine. Before intervening on diameter, turbine thickness, make a test of flow, height lifting, intensity of the motor, turn minute requires me a DIY. Why? Because 8-10A gives me as much as 3-5 Amp, at a lift author 5-10m. Of course the one lifts the water much higher and constantly draws 8-10A. 5 Ampere, possible to run on a model battery with bms, solar panel and run intermittently.... I will come back

Bu model hakkında

Experimental dismountable pump to be operational., Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller