Tower - Icegianter

Açıklama

Measurements: Measurements are 1.5 inch by 1.5 inch by 3 inch Or 38.1 mm by 3.81 mm by 76.2 mm Printing: I printed mine for a tower competition, so if you want to follow the same rules, here they are: Rules: Must be 3 - 4 inches (76.2 - 101.6 mm) tall Must have a ½ inch (12.7 mm) hole through the center vertically Must weigh less than 15 grams Must have an internal volume of 9 squared inches (I'm pretty sure mine followed the last rule although I might be off) Slicing: For my tower to cut the weight, I printed it at 0% infill 1 perimeter Solid layers top/bottom 1 as well No supports This was printed on an MK4s This held 311.6 lbs (141.3 kg) It failed on the diagonal outer corners, top right and bottom left in cover image