简介
Measurements: Measurements are 1.5 inch by 1.5 inch by 3 inch Or 38.1 mm by 3.81 mm by 76.2 mm Printing: I printed mine for a tower competition, so if you want to follow the same rules, here they are: Rules: Must be 3 - 4 inches (76.2 - 101.6 mm) tall Must have a ½ inch (12.7 mm) hole through the center vertically Must weigh less than 15 grams Must have an internal volume of 9 squared inches (I'm pretty sure mine followed the last rule although I might be off) Slicing: For my tower to cut the weight, I printed it at 0% infill 1 perimeter Solid layers top/bottom 1 as well No supports This was printed on an MK4s This held 311.6 lbs (141.3 kg) It failed on the diagonal outer corners, top right and bottom left in cover image
About this model
Tower - Icegianter is a 免费 3D model in the 其他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
