RAK 150 Enclosure Mag Mount (Meshtastic)

RAK 150 Enclosure Mag Mount (Meshtastic)

Ücretsiz STL Gadget ve Aksesuar
  • 19 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

This allows you to attach a mag mount to the RAK Wireless 150mm enclosure. It also provides a 90 deg surface to the top you can drill through, so your antennas stand straight up. I recommend putting some kind of sealant between the top area and the enclosure. Then drill through both to add your antenna mount. This should prevent any leaks. Below are links to the enclosure and the the magnets used. Use JB Weld or similar to glue the magnets in place. RAK 150 Enclosure: https://store.rakwireless.com/products/unify-enclosure-ip67-150x100x45mm-with-pre-mounted-m8-5-pin-and-rp-sma-antenna-ip-rated-connectors?variant=42861623738566 Magnets: https://amzn.to/4gpKubD

Bu model hakkında

RAK 150 Enclosure Mag Mount (Meshtastic), Cults3D topluluğunda paylaşılan ücretsiz bir Gadget ve Aksesuar 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller