Calibration Bundle #2

Calibration Bundle #2

Ücretsiz STL Diğer
  • 21 görüntülenme

Bu model Creality Cloud üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Creality Cloud üzerinde görüntüle ↗

Açıklama

Two models that will help you calibrate retractions and bridging. The first model is 20 mm per side and needs to be printed without support, the second model is 25 mm per side. If you notice stringing using FDM printers, then you need to adjust your retraction settings according to the filament that is being used.Printer: CR10 Smart ProSlicer: Cura 4.8Bed Type: PEIFDM - PLA - 1.75mmQuality: Normal0.8 mm wall thickness / 2 lines per wall 210° hotend / 60° bed50 mm/s (for starters)Retraction enabled (picture for reference)Fan: 100%Bedplate adhesion: skirtNo Support

Bu model hakkında

Calibration Bundle #2, Creality Cloud topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Creality Cloud üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller