简介
Two models that will help you calibrate retractions and bridging. The first model is 20 mm per side and needs to be printed without support, the second model is 25 mm per side. If you notice stringing using FDM printers, then you need to adjust your retraction settings according to the filament that is being used.Printer: CR10 Smart ProSlicer: Cura 4.8Bed Type: PEIFDM - PLA - 1.75mmQuality: Normal0.8 mm wall thickness / 2 lines per wall 210° hotend / 60° bed50 mm/s (for starters)Retraction enabled (picture for reference)Fan: 100%Bedplate adhesion: skirtNo Support
About this model
Calibration Bundle #2 is a 免费 3D model in the 其他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
