Triple-Tac-Toe

Açıklama

Triple-Tac-ToeThis is a variation on the classic Tic-Tac-Toe game where you get three different sizes of pieces so you can change the colour of a piece that has already been placed, by placing a larger piece over a smaller one. The idea isn't mine - I've seen it online, but I did go through quite a lot of different designs to come up with a way to package the entire set neatly.The frame unfolds to become the playing board and then each player gets a tray containing their pieces. The largest pieces screw into the tray to keep the smaller ones in place. See the video for how to assemble/disassemble and how to play.This prints without supports in most filaments (I have successfully printed this in PLA, PETG and ABS). I have attached a .3mf file that has my recommended plate layouts, but if you want to roll your own, you need to print:1x TripleTacToe-Frame.stl2x TripleTacToe-Tray.stl3x TripleTacToe-LargePiece.stl (in colour 1)3x TripleTacToe-LargePiece.stl (in colour 2)3x TripleTacToe-MediumPiece.stl (in colour 1)3x TripleTacToe-MediumPiece.stl (in colour 2)3x TripleTacToe-SmallPiece.stl (in colour 1)3x TripleTacToe-SmallPiece.stl (in colour 2)Print Settings:Nozzle Size: 0.4 mmLayer Height: 0.2 mm (first), 0.1mm for the restWalls: 3Support: NoneInfill: 15% Gyroid3 Top, 3 Bottom LayersI think it comes out better with the top layer ironed.