简介
Triple-Tac-ToeThis is a variation on the classic Tic-Tac-Toe game where you get three different sizes of pieces so you can change the colour of a piece that has already been placed, by placing a larger piece over a smaller one. The idea isn't mine - I've seen it online, but I did go through quite a lot of different designs to come up with a way to package the entire set neatly.The frame unfolds to become the playing board and then each player gets a tray containing their pieces. The largest pieces screw into the tray to keep the smaller ones in place. See the video for how to assemble/disassemble and how to play.This prints without supports in most filaments (I have successfully printed this in PLA, PETG and ABS). I have attached a .3mf file that has my recommended plate layouts, but if you want to roll your own, you need to print:1x TripleTacToe-Frame.stl2x TripleTacToe-Tray.stl3x TripleTacToe-LargePiece.stl (in colour 1)3x TripleTacToe-LargePiece.stl (in colour 2)3x TripleTacToe-MediumPiece.stl (in colour 1)3x TripleTacToe-MediumPiece.stl (in colour 2)3x TripleTacToe-SmallPiece.stl (in colour 1)3x TripleTacToe-SmallPiece.stl (in colour 2)Print Settings:Nozzle Size: 0.4 mmLayer Height: 0.2 mm (first), 0.1mm for the restWalls: 3Support: NoneInfill: 15% Gyroid3 Top, 3 Bottom LayersI think it comes out better with the top layer ironed.
About this model
Triple-Tac-Toe is a 免费 3D model in the 其他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
