IR & RF Hub

Ücretsiz STL Diğer

20 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

A DIY IR and RF hub using an ESP32 and CC1101 RF module, complete with temperature and light sensors. Integrates natively into Home Assistant via ESPHome. Perfect for automating IR and RF devices without relying on cloud services.Watch the video below for the full tutorial and usage guides:▶️ RF Control in Home Assistant – Clone Any Remote with ESPHome▶️ RF & IR Control in Home Assistant – Trigger Automations with Any Remote | ESPHome▶️ Home Assistant RF & IR Hub – PCB Assembly & 3D Printed EnclosureAll YAML files, configuration instructions, and label templates are available on GitHub:https://github.com/LazyTechGeek/HomeAssistant-RFBill of MaterialsCarrier PCB V1.3 GerbersESP32 Dev Board x1 (38-pin, requires both 3.3V and 5V pins) (pack of 3)CC1101 433MHz RF Module (Choose One)Green PCB Version (Pinout A)Blue PCB Version (Pinout B)2N2222 NPN Transistor x122Ω Resistors x21kΩ Resistor x1Resistor Assortment KitIR Transmitter LEDs x4 (5mm, 940nm)VS1838B IR Receiver x1IR LED & Receiver KitImportant: Component ValuesR1: 1kΩ resistorR2, R3: 22Ω resistorsC1, C2: 100nF (104) ceramic capacitors🧩 PCB FilesOrder from PCBWay

Bu model hakkında

IR & RF Hub, Thingiverse topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.