NESTOUT Threaded Cap

NESTOUT Threaded Cap

Ücretsiz STL Diğer
  • 22 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Thingiverse üzerinde görüntüle ↗

Açıklama

This is a threaded cap for a NESTOUT battery bank, with a hole at the top to allow a USB cable to be permanently threaded through it. This allows for:USB to be installed before installing the capBetter protection against debris and waterThe threads are the most critical part of the model, everything else can be modified to meet your needs. Cap dimensions:Outside diameter = 30.6mmInside diameter = 26.6mmInside depth = 40mmHeight = 42mmTop Hole Diameter = 2.9mmTop filet = 2mmThread details:Diameter = 26.6mmRevolutions = 2Pitch = 2mmAngle = 0Section = Triangular (Internal)Section Position = InsideSection size = 1.3mmOperation = JoinStarts 3mm from edgeStarting point extruded 6mm

Bu model hakkında

NESTOUT Threaded Cap, Thingiverse topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Thingiverse üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller