Parametric t-nut

Ücretsiz STL Diğer

22 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Açıklama

This is a parametric t-nut. It is suitable for light-duty use. You can set parameters so that this accepts a metal nut, 4-sided, or 6-sided. Or you can make it to be nutless, in which case you will need to tap threads into the unit after it has been printed.You could also add threads before printing using the OpenSCAD thread library: https://github.com/adrianschlatter/threadlib but I find these printed threads typically need to be cleaned by a tap before they are fully-usable. In the two pictures I have an M6 nut and bolt in the unit. I will be using this to mount a Wii sensor bar under our television. There's quite a few similar-ish parametric t-nuts on thingiverse. See here:https://www.thingiverse.com/thing:2799384https://www.thingiverse.com/thing:3956297https://www.thingiverse.com/thing:3023276https://www.thingiverse.com/thing:14059https://www.thingiverse.com/thing:1729060https://www.thingiverse.com/thing:75322

Bu model hakkında

Parametric t-nut, Thingiverse topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.