简介
This is a parametric t-nut. It is suitable for light-duty use. You can set parameters so that this accepts a metal nut, 4-sided, or 6-sided. Or you can make it to be nutless, in which case you will need to tap threads into the unit after it has been printed.You could also add threads before printing using the OpenSCAD thread library: https://github.com/adrianschlatter/threadlib but I find these printed threads typically need to be cleaned by a tap before they are fully-usable. In the two pictures I have an M6 nut and bolt in the unit. I will be using this to mount a Wii sensor bar under our television. There's quite a few similar-ish parametric t-nuts on thingiverse. See here:https://www.thingiverse.com/thing:2799384https://www.thingiverse.com/thing:3956297https://www.thingiverse.com/thing:3023276https://www.thingiverse.com/thing:14059https://www.thingiverse.com/thing:1729060https://www.thingiverse.com/thing:75322
About this model
Parametric t-nut is a 免费 3D model in the 其他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
