Samsung Freezer Door Storage Rack Extensions

Samsung Freezer Door Storage Rack Extensions

Ücretsiz STL Diğer
  • 22 görüntülenme

Bu model Thingiverse üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Thingiverse üzerinde görüntüle ↗

Açıklama

These adapter extensions add about 50% more space by measurement, but in practice the space is 100% or more usable. There is still an excess gap and amount of space between the door's extended storage trays and the primary interior freezer shelf. No glue or silicone is needed to hold the adapters firmly in place when the door tray-compartment is firmly in place. But I used a thin film of silicone to hold the adapters firmly in place all by themselves and without the need for the factory door compartments to be in place. This will allow for carefree cleaning.

Bu model hakkında

Samsung Freezer Door Storage Rack Extensions, Thingiverse topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Thingiverse üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller