DIY Microscope

DIY Microscope

Ücretsiz STL Hobi ve DIY
  • 26 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

Recycle an old disk drive, take out the main lens and insert it into the hole in the printed table, place your smartphone on top aligning the lens with the camera, screw the nut onto the screw, the nut has a bed with holes, using some transparent tape or glass color what you want to see over one of the holes so the light can pass underneath. IMPORTANT: print the nut with as little filler as possible and the screw with at least 50% filler, it is important to keep the base heavy.

Bu model hakkında

DIY Microscope, Cults3D topluluğunda paylaşılan ücretsiz bir Hobi ve DIY 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller