Arcade Button Plate

Arcade Button Plate

Ücretsiz STL Diğer
  • 12 görüntülenme

Bu model Cults3D üzerinde barındırılıyor. Dosyalar, görseller ve lisans bilgileri tasarımcısına aittir.

Cults3D üzerinde görüntüle ↗

Açıklama

First step in building my arcade cabinet is getting the buttons set up. This is set up to hold 2 rows of 4 buttons + Start/Select, a joystick, and the controller board. If you want to transfer the holes to a board it includes a router template and washers. The controller board uses M2.5 nuts/bolts (M2 should probably fit too). The joystick and board itself use M4 nuts/bolts, if you don't countersink the holes I recommend buttonhead cap screws and the washers. This is the kit I used, but they all look about the same: https://www.amazon.com/dp/B07JFXQSM5

Bu model hakkında

Arcade Button Plate, Cults3D topluluğunda paylaşılan ücretsiz bir Diğer 3D modelidir. 3D baskı için indirebilir ve orijinal lisans koşulları çerçevesinde kendi projelerinde kullanabilirsin.

Dosya formatları

  • STL — 3D baskı için en yaygın mesh formatı — neredeyse her yazıcıda dilimlenip basılmaya hazır.

Bu modelin dosyaları Cults3D üzerinde barındırılır. Orijinal sayfayı açıp indirmek için yukarıdaki düğmeyi kullan.

Benzer modeller