简介
FR / EN EN : A simple coil support to be made without a stand Best printed in PETG especially for sliding arms. I used 608 2rs bearings https://www.amazon.de/.../ref=ppxyodtbasintitleo00... With the adjustable screw this will give you a width of 52 to 82 mm. which is quite a bit of possible coil width. I prefer an 80% straight fill. Count 5 h for the two large pieces forming the base. and 2h for the kit: screw, stop, pad. For PETG 230 for the nozzle and 85 for the bed. Don't hesitate to share your achievements with me it's always interesting. Good Print ! EN: A simple supportto be made without a stand Preferably printed in PETG, especially for the sliding arms. I used 608 2rs bearings https://www.amazon.de/.../ref=ppxyodtbasintitleo00... With the adjustable screw this will give you a width of 52 to 82 mm. which is quite a lot of possible coil width. I prefer 80% straight filling. Allow 5 hours for the two large pieces forming the base and 2 hours for the kit: screw, stop, pad. For the PETG 230 for the nozzle and 85 for the bed. Don't hesitate to share your work with me, it's always interesting. Have a good print! 3d #3dprinting #3dart #3dprinted #3dmodeling #3dmodel #3dender #3dprusa #ender3 #prusa #3dmk3s #diy #maker #3dprinter #impression3d #madeinbelgium #ender3 #followme #filament #pla
About this model
Coil support is a 免费 3D model in the 其他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
