简介
To convert my old IMAC 2015 27 "5K into an iMac Cinema Display I need a camera and compatible micros, the originals cannot be used. Find in Aliexpres some generic with USB port to which they can be connected to the panel control plate, it is not necessary to install drivers, and in the camera to others to offer great quality by 5MPX it works really well.The microphone is located in one of the original two places. In the camera support I have arranged two holes to install 2 LEDs of 3mm, one indicates the Powe ON of the controlling plate, the other LED + 10K OHMS resistance is designed to illuminate with the + 5V of the USB that feeds the microphone and the camera from a rear switch,I want to deactivate them, for this I use an old USBA cut cable for the microphone, identifying the 4 contacts, but only use a food for both, the consumption is really very low. I will update this thread when I decide that I add switch at the back, locating it in the IEJO RJ45 connector space. Both the +5V of the micro and the camera are attached to the resistance of the LED. I will upload a more detailed scheme for those who do not master the subject so much.Printed to 0.016 PetG To avoid heat problems with the PLA.Camera with AF…
About this model
Camera Imac Support is a 免费 3D model in the 其他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
