简介
This is a sleeve for 87.5-108MHz band stop filters, such as this one: https://it.aliexpress.com/item/1005009536117241.html.It should protect it from moisture and dust, while also making it easier to manipulate. The caps has a knurled edge, ensuring a handy grip while rotating the whole assembly.It's made up of 3 pieces, the central sleeve and two caps. To assemble:put one cap at one end of the filter. The square hole should fit right on the SMA plug;slide the filter and cap inside the tube. The cap has a notch that should match the groove inside the tube: be sure to align it correctly.put the second cap at the other end of the tube, minding the orientation of the groove and SMA plug.It should be a tight fit, so glue isn't really required.
About this model
Band stop filter shell is a 免费 3D model in the 其他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
