Ebyte E290-series magnet holder case

Ebyte E290-series magnet holder case

免费 STL 数码配件
  • 9 次浏览

该模型托管于 Cults3D。文件、图片及许可信息归原创作者所有。

在 Cults3D 查看 ↗

简介

This is a universal housing for the EBYTE E290 series usable for RS485 / MODBUS wireless connections, more specifically the E290-400R30D and the E290-400R20D which is smaller. It is equipped with an opening to install a chassis USB-C connector (Easy to find on ALIexpress) and an opening for CAT4-5 cable with a push pulls clamp. You can leave the supprt for the USB connector in there if you power the unit over the RJ45 cable. The bottom side has two openings for screw mount magnets of 1cm diameter (also easy to find on ALI) to be able to stick the unit on a metal case like a metering cabinet or metal inverter. There is also a thinner part in the front to be able to see the LED's on the board, most coloured or white filaments are transparent enought to see the bright LED's

About this model

Ebyte E290-series magnet holder case is a 免费 3D model in the 数码配件 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

相似模型